A Practical Guide to `nonisolated` in Swift Concurrency

Swift’s concurrency model leans heavily on isolation—especially actor isolation—to prevent data races. The nonisolated modifier is a precision tool that lets you selectively opt out of that isolation for specific members, so you can call them without hopping to the actor’s executor (and thus without await). Used well, it helps you keep APIs fast and ergonomic while preserving safety.

What `nonisolated` Means

Definition: nonisolated marks an actor (or global‐actor–isolated type) member as not isolated to that actor. Such members:

Are callable from any context without await and without switching executors.
Must not read or mutate actor-isolated state (directly or indirectly).
Are effectively “plain” synchronous Swift code with no special isolation.

Where it applies:

Instance funcs, computed vars, and subscripts of actors or types annotated with a global actor (e.g., @MainActor).
Protocol requirements and their conforming implementations (to promise a nonisolated API surface).
static members are already nonisolated; nonisolated is about instance members.

Tip: nonisolated does not make code magically thread-safe. It only says, “this member doesn’t require actor isolation,” so you must design it to truly not depend on isolated state.

How It Interacts with Actor Isolation

By default, every instance member of an actor is actor-isolated. Calling it from outside the actor requires await, which hops to the actor’s executor.

Marking a member nonisolated removes that isolation—no hop, no suspension. But that freedom comes with a rule: the member cannot access actor-isolated state. The compiler enforces this for safe nonisolated (see nonisolated(unsafe) caveat later).

actor Counter {
    private var value = 0

    func increment() {            // isolated to Counter
        value += 1
    }

    nonisolated func version() -> String {  // no hop, no await
        "1.0"
    }

    nonisolated var isBeta: Bool {          // computed, no actor state
        false
    }
}

Calling site:

let counter = Counter()
await counter.increment()  // requires hop

counter.version()          // no await ✅
counter.isBeta             // no await ✅

If a nonisolated member touches isolated state, the compiler flags it:

actor Counter {
    private var value = 0

    nonisolated func snapshot() -> Int {
        value            // ❌ error: actor-isolated property 'value' can’t be accessed from a nonisolated context
    }
}

Use Cases That Fit `nonisolated`

Pure utilities and constants Methods that compute results from inputs only (or constants), not from actor state.

actor UUIDProvider {
    nonisolated static let namespace = UUID(uuidString: "6ba7b810-9dad-11d1-80b4-00c04fd430c8")!

    nonisolated func make() -> UUID { UUID() } // safe: no actor state
}

Protocol conformances that should be usable everywhere Many protocols are most ergonomic when conforming members are callable without await:

CustomStringConvertible.description
Hashable.hash(into:)
Equatable.==
Comparable.<
Error, LocalizedError, etc.

actor User: CustomStringConvertible, Hashable {
    let id: UUID
    private var name: String

    init(id: UUID, name: String) {
        self.id = id
        self.name = name
    }

    nonisolated var description: String { "User(\(id))" } // uses only 'id' (immutable)

    nonisolated func hash(into hasher: inout Hasher) {
        hasher.combine(id)  // avoid isolated state like 'name'
    }

    nonisolated static func == (lhs: User, rhs: User) -> Bool {
        lhs.id == rhs.id
    }
}

Global-actor types that need “fast path” members On @MainActor types (view models, controllers), you might want some members callable off the main thread without hopping:

@MainActor
final class SessionViewModel {
    let sessionID = UUID()

    nonisolated var stableID: UUID { sessionID } // ❌ usually illegal: touches isolated state
    // Fix: capture an immutable copy during init into a nonisolated-friendly store.
}

@MainActor
final class SafeSessionViewModel {
    private let _id: UUID  // initialized once; never mutated
    init() { _id = UUID() }

    nonisolated var stableID: UUID { _id }  // ✅ not accessing main-actor state; it's just a private, immutable value
}

Logging / metrics / feature flags that don’t depend on actor state. Keep hot-path logging synchronous and hop-free.

Correct vs. Incorrect Usage

Correct

actor Math {
    nonisolated func fib(_ n: Int) -> Int {
        // Pure function: no actor state
        if n < 2 { return n }
        var a = 0, b = 1
        for _ in 2...n { (a, b) = (b, a + b) }
        return b
    }
}

Incorrect (accessing isolated state)

actor Cache {
    private var storage: [String: String] = [:]

    nonisolated var count: Int {
        storage.count           // ❌ error: touches actor-isolated 'storage'
    }
}

Incorrect (derived from mutable isolated state—even if you could read it)

Even if you somehow bypass checks, exposing values derived from mutable isolated state as nonisolated is a data-race risk.

actor Clock {
    private var skewMillis: Int = 0

    nonisolated func now() -> Date {
        // ❌ Conceptually wrong: result depends on mutable actor state.
        Date().addingTimeInterval(TimeInterval(skewMillis) / 1000)
    }
}

`nonisolated` vs. Related Concepts

`nonisolated` (safe)

Where: actor/global-actor instance members; protocol requirements.
Effect: callable from anywhere, no await, no executor hop.
Constraint: cannot touch actor-isolated state; compiler enforces.

`nonisolated(unsafe)` (escape hatch)

Effect: same call-site behavior as nonisolated, but the compiler does not fully enforce “no actor state” access. You can read isolated state… and introduce data races.
Use sparingly, typically for legacy interop, debugging hooks, or when you prove the touched state is effectively immutable.

actor ImageCache {
    private var count = 0

    nonisolated(unsafe) func debugCount() -> Int {
        count // ⚠️ allowed, but racy; don’t ship this in production
    }
}

`isolated` (parameter modifier)

Where: function parameters (including self in protocols/extension methods).
Effect: inside the function, the parameter is treated as if you’re already on that actor’s executor, so you can access its isolated state synchronously without await.
Use case: factoring logic into helpers that run on an actor while keeping the helper itself synchronous.

func dumpState(of actor: isolated Counter) {
    // Inside here, you’re on actor’s executor; can touch isolated state.
    // No 'await' needed for actor operations.
}

let c = Counter()
await dumpState(of: c)  // Call site must ensure isolation (await or be already on it).

Regular actor members (default)

Instance members are isolated; calling from off-actor needs await.
Safest and most common default.

Common Pitfalls

Reading isolated state (directly or indirectly)
- Direct field access is rejected for safe nonisolated.
- Indirect reads (e.g., calling an isolated helper) also violate isolation.
Leaking mutable state through “stable” views
- Don’t expose references/pointers derived from isolated state; even if they look read-only, the underlying data may mutate concurrently.
Forgetting global-actor context
- @MainActor types are also “actor-isolated” to the main actor. nonisolated on those members still must avoid main-actor state.
Overusing nonisolated(unsafe)
- It compiles but undermines safety guarantees. Treat it like unsafeBitCast: last resort.
Stored properties
- nonisolated applies to methods / computed properties / subscripts. Stored properties remain isolated; design around that (capture immutable copies in init, or expose safe computed views).

Best Practices

Make it obviously pure. Keep nonisolated members free of side effects and independent of mutable isolated state.
Prefer immutable inputs. If you must reference instance data, arrange it so the data is immutable after init (e.g., a private let captured during initialization and never mutated).
Use for protocol ergonomics. Mark conformances for Equatable, Hashable, CustomStringConvertible, etc., as nonisolated when they rely only on immutable identity.
Document guarantees. If a member is nonisolated because it’s logically pure, say so in doc comments (helps reviewers maintain the invariant).
Measure when optimizing. The “no hop” benefit is real on hot paths, but premature use can tempt unsafe designs.

Performance Considerations

No executor hop = fewer context switches. nonisolated avoids suspension and executor switching, which can reduce latency in synchronous call chains—especially important on hot UI or service endpoints.
Still synchronous. There’s no implicit parallelism. If the body is heavy, you’re still doing that work inline on the caller’s thread/executor.
Beware false sharing. Don’t turn a mutable, frequently changing value into a nonisolated computed property. Even if you could make it compile, the call sites may observe inconsistent snapshots.

Additional Examples

Protocol requirement declared `nonisolated`

You can declare a protocol API to be nonisolated so conforming actors provide hop-free implementations:

protocol Identity {
    nonisolated var id: UUID { get }
}

actor Account: Identity {
    private let _id = UUID()

    nonisolated var id: UUID { _id } // ✅ based on immutable state
}

Nonisolated subscript

actor Words {
    private let dictionary: Set<String>

    init(_ words: [String]) { dictionary = Set(words) }

    nonisolated subscript(candidate: String) -> Bool {
        candidate.allSatisfy(\.isLetter) // ✅ no actor state
    }
}

Mixing `nonisolated` with async members

actor Repository {
    private var items: [String] = []

    func add(_ s: String) { items.append(s) }   // isolated
    func all() -> [String] { items }            // isolated

    nonisolated func isValidKey(_ s: String) -> Bool { // pure validation
        !s.isEmpty && s.allSatisfy(\.isLetter)
    }
}

Summary

What: nonisolated marks members as not actor-isolated, allowing sync, hop-free calls from anywhere.
Why: Improve ergonomics and performance for pure utilities, protocol conformances, and stable metadata.
How: Ensure the member does not access actor-isolated (or global-actor) state—design with immutability/purity.
Compare:
- nonisolated — safe, compiler-checked.
- nonisolated(unsafe) — escape hatch; can read isolated state but forfeits safety.
- isolated — parameter modifier to establish isolation inside a function.
Practice: Use sparingly, document invariants, avoid mutable dependencies, and measure benefits.

Used thoughtfully, nonisolated gives you the best of both worlds: Swift’s strong isolation guarantees and crisp, zero-hop APIs where they count.

A Practical Guide to 'nonisolated' in Swift Concurrency

Contents

A Practical Guide to `nonisolated` in Swift Concurrency

What `nonisolated` Means

How It Interacts with Actor Isolation

Use Cases That Fit `nonisolated`

Correct vs. Incorrect Usage

Correct

Incorrect (accessing isolated state)

Incorrect (derived from mutable isolated state—even if you could read it)

`nonisolated` vs. Related Concepts

`nonisolated` (safe)

`nonisolated(unsafe)` (escape hatch)

`isolated` (parameter modifier)

Regular actor members (default)

Common Pitfalls

Best Practices

Performance Considerations

Additional Examples

Protocol requirement declared `nonisolated`

Nonisolated subscript

Mixing `nonisolated` with async members

Summary

Navigation menu

A Practical Guide to 'nonisolated' in Swift Concurrency

A Practical Guide to nonisolated in Swift Concurrency

What nonisolated Means

How It Interacts with Actor Isolation

Use Cases That Fit nonisolated

Correct vs. Incorrect Usage

Correct

Incorrect (accessing isolated state)

Incorrect (derived from mutable isolated state—even if you could read it)

nonisolated vs. Related Concepts

nonisolated (safe)

nonisolated(unsafe) (escape hatch)

isolated (parameter modifier)

Regular actor members (default)

Common Pitfalls

Best Practices

Performance Considerations

Additional Examples

Protocol requirement declared nonisolated

Nonisolated subscript

Mixing nonisolated with async members

Summary

Navigation menu

Search

A Practical Guide to `nonisolated` in Swift Concurrency

What `nonisolated` Means

Use Cases That Fit `nonisolated`

`nonisolated` vs. Related Concepts

`nonisolated` (safe)

`nonisolated(unsafe)` (escape hatch)

`isolated` (parameter modifier)

Protocol requirement declared `nonisolated`

Mixing `nonisolated` with async members